RGB IR Controller 12V 24V For RGB Strip Light & RGB Neon Flex
- The volts of the power supply must correspond to the volts of controller. This RGB infrared remote controller is widely used in 5050 2835 3528 led lights remote replacement
- Led light strip remote can be adjust R/G/B color freely. 6 DIY modes / 20 static colors / 6 color changing modes / brightness dimmer. RGB led controller is equipped with memory function
- Turn on led lights, press DIY1 button, it will enter DIY mode. ② You can press arrows of Red Green and Blue to adjust the color that you want. ③ Finishing the color adjustment, press DIY1 to save the current color. Same way to set DIY2 to DIY6
- Pull out the plastic cover on the buttom of remote before use. ② Connect 4 pin output port with led strip (arrows marks between control box and strip connector should be on same position). ③ Remote should be aimed at the ir receiver and without any obstacles
- Turn off the light strip. ② Press the “FADE7” button, the light strip will flash once. ② Press the three keys R.G.B to adjust the color order. ③ Turn on light strip, the buttons control the right color. ④ If not, repeat the above steps until remote button control the correct color
